How to Install Your Mineral Stream Products

Simple Steps for a Luxurious & Healthy Shower Experience

Installing Your Mineral Stream Showerhead

Remove Old Showerhead: Unscrew counter-clockwise (left). Use a wrench if needed.

Clean Shower Arm Threads: Remove old tape/debris.

Apply Plumber's Tape: Wrap 3-4 times clockwise around threads.

Attach New Showerhead: Screw clockwise onto taped arm. Hand-tighten firmly.

Check for Leaks: Turn on water. Tighten by hand if leaks occur; reapply tape if needed.

Mineral Stream Hard Water Filter Installation & Use

Your filter transforms water, making it softer and purer.

  1. Prep: Remove old showerhead. Clean and tape shower arm threads clockwise.
  2. Attach Filter: Tape filter inlet threads clockwise. Screw filter clockwise onto shower arm. Hand-tighten.
  3. Connect Showerhead/Hose: Attach your showerhead/hose to filter outlet. Hand-tighten.
  4. Test & Enjoy: Turn on water, check for leaks.

How it Works: Water flows through the filter, reducing chlorine, hard minerals, and impurities for softer skin, hair, and a cleaner shower.